Interface

   

Designed and manufactured in the UK

Chrono Pod

The Chrono Podule is a 24 hour / 365 day event timer that interfaces seamlessly with a PodNet based system to give full automatic functionality.

The unit can be used as a standalone device to provide RS232 messages making it ideal for auto shutdowns / startups for point of sale displays and electronic signage.


It also has a power LED to indicate when power has been connected, either directly or by PODNET, and a RX / TX LED to indicate when the unit is transmitting its RS232 commands.

 


Rain Water Gauge

The Rain Collector is a tipping bucket rain gauge designed to meet the guidelines of the World Meteorological Organization. Rain enters the collector cone, passes through a debris-filtering screen, and collects in one chamber of the tipping bucket. The bucket tips when it has collected an amount of water equal to the increment in which the collector measures (0.2mm). As the bucket tips, it causes a switch closure and brings the second tipping bucket chamber into position. The rain water drains out through the screened drains in the base of the collector.

The body and base of the collector are constructed of tough, UV resistant plastic. The tipping bucket pivots on bearings that minimize friction and wear. Stainless steel adjustment screws under each chamber of the tipping bucket allow you to fine-tune the calibration. Mounting holes are predrilled in the base and a built-in leveling trough aids in installation.

 

Rain Sensor

There’s nothing more embarrassing–or more wasteful or costly–than an irrigation system that runs when it doesn’t have to…in the rain. Mini-Clik® provides the simplest, most effective way to prevent sprinklers from coming on during or after precipitation. It easily installs on any automatic irrigation system, then shuts sprinklers off in a storm and keeps them off, automatically compensating for the amount of rainfall that occurred. Disks absorb water and expand proportionally to the amount of rain that fell (e.g., a small cloudburst would result in little absorption, a 150 mm thunderstorm would lead to more absorption and expansion). As the moistureladen disks expand, they eventually activate a switch that interrupts the circuit from the controller to the valves. Once dry, they contract and release the switch. Thus, Mini-Clik automatically resets without ever affecting your controller. There’s no better way to ensure that a system isn’t watering when it isn’t necessary

 

 

Water Valve 24V AC (12V DC and 24 DC on request)

100% water tested, 150 psi (10,3 bar) rating.

Unique “reverse flow” porting design permits equal pressure distribution on both sides of the diaphragm, regardless of line pressure providing zero stress to prevent "stretching" which can be a common cause of valve failure.

Marine grade solenoid with stainless steel actuator.

Manual override and build in flow regulator.

1" pipe fittings.

Made in the USA

  SKU/Item Number: WSnoid24Vac Price: $125NZ
 

 

 

Designed and manufactured in New Zealand

Relay 8

The Relay 8 is an open frame, heavy duty, relay output module.

Designed to withstand inductive load switching and high current applications removing the need to add extra contactors and heavy duty relays to control systems.

Dual communication ports support both RS232 and RS485 communications.

Data Sheet

  SKU/Item Number:Relay08- more... Price: $500NZ

 

 

Temprature Sensor

The ATS2485D is a rugged temperature sensor
that permits inconspicuous operation both indoors and out. It snaps easily into a 19mm hole in either Gib board (drywall) or wood. Small size, rugged construction and easy screw-down wire connections afford easy installation.
The high reliability and exceptional accuracy of the ATS2485D make it a logical choice for many HVAC control and home automation projects.

Data Sheet

SKU/Item Number: ATS2485D Price: $180NZ

 

 

Designed in New Zealand

Wireless Level Monitor

The D110-S is a fully wireless, multi-tank capable, fluid level monitor with adjustable high and low level alarms. You can also set a top air gap for those underground tanks that use a riser. Can be used on water or Diesel.

It has an easy to read blue backlit LCD display, and when used with additional T110 Tank Units, you can monitor up to 6 tanks/cisterns from the one Display Unit..more info

Now With Axium ,Control 4, Crestron, Bitwise, 2 way Drivers .

SKU/Item Number:D110S + T110 Price: $630NZ

 

 

 

Power Meter

Digital Power meter, data available; Volts, Current, frequency.

Modules available in single and 3 phase also DC versions on request.

Data Sheet

Can be used with Axium , Command Fusion, Bitwise, Crestron and most control systems with 2 way .

SKU/Item Number: powermeter SP Price: $800NZ