Welcome to a new era in control.

The range of the new Axium products are designed to all comunicate with each other with little effort and time in programming, with the Mutiroom amp the AX800 and AX400 straming metaData and cover art back to you mobile android or IOS device, to the range of cantroller with power macrcr'd , flags status, IR and serial port, all designed to integrate in to most systems.

News

new updates,

AX800 updates

New source specific delays (AX-800-DAV only). Every zone now has its own set of delays for every source. There is a total of 64 delay settings on the AX-800-DAV.
New low pass filter option to the preamplifier outputs for driving subwoofers through a standard amplifier (AX-800-DAV only).
Added power on volume selection.
IAdded mono / stereo selection.
IR out now available in Design portal Gui designer.

Design Portal

New scrolling window added
IR ports available to 3rd party controller like Command fusion

If you would like a professionl Axium recomended Installers please email support@ikonavs.co.nz

Products Product Name     RRP inc Gst
Controllers        
  AX-R4C

Data sheet here

firmware here

 

AX-R4 Controller


The NEW Axium R4 Controller Unlocking the full potential of the KPC and KPD keypads and enhancing both the Android and Apple experience.The AX-R4 facilitates 2-way communication between the KPC, KPD, Mobile Android and iOS devices and a wide range of 3rd party products bringing Metadata back from these devices to the end user.Balanced feeds from the AX-R4 to the KPC and KPD keypads allow for cable runs of up to 100 meters.

With 2 way routed RS232, Ethernet, routed IR, real timeclock with internet lookup, Analog level detect inputs, command match triggers and relay drivers, the power of 2 way communication is realised.The addition of AX-S4 sensors provides detection of Audio, Video or Current enabling enhanced flag control.

4 x RS232 DB9
8 x Axium Keypad RJ45 ports
Configuable IR code detect triggers
Maximum of 32 IP connections
Configurable IP code specific detection triggers.
4 x IR emitter output / sensor inputs : t.
4 x IR emitter outputs
Realtime internal clock, astronical clock and time based scheduled tasks
2 x Analog level threshold triggers: 0 - 10V I
2 x 12VDC Relay drivers: 300mA max active pulldown.

 

$1999

  AX-R1C

AX-R1 Controller


The NEW Axium R1 Controller ,Android and Apple experience.The AX-R4 facilitates 2-way communication between the KPC, KPD, Mobile Android and iOS devices and a wide range of 3rd party products bringing Metadata back from these devices to the end user.Balanced feed from the AX-R1 to the KPC and KPD keypads allow for cable runs of up to 100 meters.

With 2 way routed RS232, Ethernet, routed IR, real timeclock with internet lookup, Analog level detect inputs, command match triggers and relay drivers, the power of 2 way communication is realised.The addition of AX-S4 sensors provides detection of Audio, Video or Current enabling enhanced flag control.

1 x RS232 DB9
1 x Axium Keypad RJ45 ports
Maximum of 16 IP connections
Configurable IP code specific detection triggers.
2 x IR emitter output / sensor inputs
Realtime internal clock, astronical clock and time based scheduled tasks
2 x Analog level threshold triggers: 0 - 10V I
2 x 12VDC Relay drivers: 300mA max active pulldown.

$999
  AX800


Although the AX800, the 8 IR ports on the AX800 can be used as a controller from your IOS and android device with your own Gui design via Design Prtal softwae.

 

$3995

Templates

 

AX-Euro


We have join forces with Blackman design again to create a smart ready to populate template. Custom templates are availble on request for those customers who would like a themed control GUI. $1200

KPC

KPC-E

Data sheet here

Axium KPC 2.8 LCD Touch Screen

The Axium KPC 2.8 Keypad is a programmable 2.8” Colour LCD Touch screen. When the KPC 2.8 is used with an Axium multi-zone amplifi­er, full 2 way feed-back of source selection, power, mute and volume status is provided. The KPC 2.8 is also capable of learning and sending IR commands and can also be used as a standalone keypad to control virtually any IR or RS-232 capable device.


Now has Ethernet with POE

$995
Multi-room Ax 800-DA

Data sheet here

 

 

The 6 powered zones delivering 50 watts per speaker & 2 independent preamp zones, all have access to 8 digital/analogue sources plus an internal audio decoder that can stream from a network storage device or from a USB stick connection on the front panel.
Of course USB, RS232 and Ethernet connectivity, routed IR outputs, 2 lit doorbell compatable triggers, individual amp on's and keypad connections, a legacy keypad controller & an amplifier expansion port offering unrivalled connectivity up to 96 zones.

•50Watts per channel 8 ohm - 4 ohm capable
•Output short cct, thermal and hard clipping protection
•11 Sources1-6 either Analogue, or Coax Digital Audio (PCM)- 7-8 either Coax or Optical Digital Audio (PCM)- 9 is streamed from the USB Host, or Ethernet- 10-11 are internal Door-Bell .wav playback sources

•10 Buffered IR Outputs. 1-8 have routing, 9-10 summed
•Zone 1-4 have a 4 source composite video switcher
•Internal real time clock
•Keypad/IR connection for every zone
•USB, RS232 and Ethernet interface
•AMP-On Status: 12VDc Outputs
•Setup lockout

$3995
  Ax 400 DA

Data Sheet here

The 4 powered zones deliver the same 50 watts per speaker that all Axium owners have come to appreciate, & with the added functionality of being able to be stacked with the AX-800DAV expansion is now even more flexable.

Of course there is USB, RS232 & Ethernet connectivity, routed IR outputs, 2 lit doorbell compatable triggers, amp on's, individual

keypad connections, a legacy keypad connector & an amplifier expansion port offering unrivalled connectivity up to 96 zones.

With adjustable input levels, more presets, wider zone linking, 2 doorbell inputs for stored music with more memory for longer playback, massively improved standby & operational efficiencies and a significant refinement in sound quality, like the AX-800DAV this is an evolutionary

• 50Watts per channel 8 ohm - 4 ohm capable
• Output short cct, thermal and hard clipping protection
4 zones Bass, Treble, Balance, Loudness adjustment per zone

6 Source Inputs
1 - 4 Analogue, or Coax Digital
5 - 6 Optical or Coax Digital
Storage for up to 10 seconds of 44.1 KHz 16 Bit stereo

• 8 Buffered IR outputs
• Internal real time clock
• Internal Web Page
• 14 Presets command
• Extensive zone linking
• AMP-On Status: 12VDC Outputs
• Setup lockout

 

$2899
IR Emmiters SL1 & SL2 New Slim line IR emmiters with a white visible LED  
Sensor AX-S4

Data Sheet here

The Axium AX-S4 Quad Sensor can accurately
detect either Mains Current, Digital Audio, Analog
Audio or Video signals with out interfering with the
original signal by using a Magnetic Sensor to detect
very small levels of current.
 
The future AX-R3900 Touch screen remote , 2.4Ghz wifi N, encrption WPA-PSK.  
Software Design Portal Available on request

New features in V2

2 way Scripts available

API documet available for those who would like to write there own scripts. ( available on request)

Axium Media Player ( access music from USB, Harddrive or NAS)

Nad Receiver
Sonos
Bititino
C-bus
Many more to come..